BS 52Y
Vibratory Rammer with 254mm/10in Shoe

WACKER's WM 80, 2-stroke engine, built for tough rammer applications
WACKER rammers have set the standard in the construction industry. These rammers are powered by the exclusive WM 80, the only 2-stroke engine specifically designed and built for vibratory rammers and meets EPA and European air emission standards. WACKER's rugged rammers are designed for maximum production, performance and durability.

Walk-Behind Trowels

CT 36ADP – Features and Benefits

• Unique handle gives operator full control with limited vibration.
• Height-adjustable control handle and posi-lock throttle improve operator comfort and reduce fatigue.
• Centrifugal clutch ensures no-load starting for easy operation and is self-adjusting for reduced maintenance.
• Large pitch-control range gives complete control over finishing and floating for application versatility during operation.
• Low center of gravity and completely enclosed belt offers clean and stable operation. Stabilizer ring on larger machines adds to smooth operation and reduces operator fatigue.
• Heat treated, ductile cast iron blade pitch control and spider are rust resistant for long life.
• Choice of handle style, WACKER-type or bicycle grip, for user preference.
• Mechanical shut off quickly stops handle rotation when released for operator safety.

• Unique handle gives operator full control with limited vibration.
• Height-adjustable control handle and posi-lock throttle improve operator comfort and reduce fatigue.
• Centrifugal clutch ensures no-load starting for easy operation and is self-adjusting for reduced maintenance.
• Large pitch-control range gives complete control over finishing and floating for application versatility during operation.
• Low center of gravity and completely enclosed belt offers clean and stable operation. Stabilizer ring on larger machines adds to smooth operation and reduces operator fatigue.
• Heat treated, ductile cast iron blade pitch control and spider are rust resistant for long life.
• Choice of handle style, WACKER-type or bicycle grip, for user preference.
• Mechanical shut off quickly stops handle rotation when released for operator safety.
• Pro-Shift® blade pitch control system allows the operator to easily and instantly change the pitch of the blades to suit temporary concrete conditions.

Vibrators

M1000 – Features and Benefits

• Lightweight, but rugged unit preferred by operators.
• Double insulated and grounded motor improves safety.
• Dual air filters extend motor life and allow for easier maintenance.
• High frequency and amplitude of the vibrator head on the Head, Motor, Shaft (HMS) System ensures more complete consolidation of concrete.
• Motor airflow from rear to front prevents dust buildup that would otherwise cause motor damage.
• Standard quick disconnect coupling on motor facilitates shaft exchange. No troublesome threading or stripping.
• Quick release brush covers simplifies brush replacements.
• Dust and waterproof on-off switch eliminates burnout and damage.
• Strain relieved electrical cord inhibits cord pull out, reducing downtime.
• Integrated quick disconnect couplings on shafts easily connect to all WACKER motors, offering 62 combinations.
• Circuit breaking carbon brushes stop motor when replacement is required.
• Standard 60 Hz electrical power.

M2000 – Features and Benefits

• Lightweight, but rugged unit preferred by operators.
• Double insulated and grounded motor improves safety.
• Dual air filters extend motor life and allow for easier maintenance.
• High frequency and amplitude of the vibrator head on the Head, Motor, Shaft (HMS) System ensures more complete consolidation of concrete.
• Motor airflow from rear to front prevents dust buildup that would otherwise cause motor damage.
• Standard quick disconnect coupling on motor facilitates shaft exchange. No troublesome threading or stripping.
• Quick release brush covers simplifies brush replacements.
• Dust and waterproof on-off switch eliminates burnout and damage.
• Strain relieved electrical cord inhibits cord pull out, reducing downtime.
• Integrated quick disconnect couplings on shafts easily connect to all WACKER motors, offering 62 combinations.
• Circuit breaking carbon brushes stop motor when replacement is required.
• Standard 60 Hz electrical power.

M3000 – Features and Benefits

• Lightweight, but rugged unit preferred by operators.
• Double insulated and grounded motor improves safety.
• Dual air filters extend motor life and allow for easier maintenance.
• High frequency and amplitude of the vibrator head on the Head, Motor, Shaft (HMS) System ensures more complete consolidation of concrete.
• Motor airflow from rear to front prevents dust buildup that would otherwise cause motor damage.
• Standard quick disconnect coupling on motor facilitates shaft exchange. No troublesome threading or stripping.
• Quick release brush covers simplifies brush replacements.
• Dust and waterproof on-off switch eliminates burnout and damage.
• Strain relieved electrical cord inhibits cord pull out, reducing downtime.
• Integrated quick disconnect couplings on shafts easily connect to all WACKER motors, offering 62 combinations.
• Circuit breaking carbon brushes stop motor when replacement is required.
• Standard 60 Hz electrical power.

Power Buggies

WB-16a – Features and Benefits

• Variable speed hydrostatic drive system with squeeze grip control lever and thumb operated forward and reverse control.
• Thumb operated dump control allows for easy dumping and spreading of materials, while keeping both hands on handlebars.
• Large capacity polyethylene bucket with high adjustable tip angle for easy unloading of materials.
• Large capacity fuel tank provides long uninterrupted operation.
• High splash guard reduces splattering of concrete outside bucket.
• Removable outer tires for easy access into narrow areas.
• Locking pin on operator platform provides greater stability for operator.
• Foot-operated scrub brake with lock for parking machine.
• Power buggy meets or exceeds ASME B56.8-1993 Safety Standard for stability and braking.

BTS 930 – Features and Benefits

• The units are driven by fully encapsulated, air-cooled two-stroke petrol engines with electronically controlled ignition systems. Designed for excellent combustion performance, low fuel consumption and lower emission values.
• A three-stage foam pre-filter, a paper lamellar filter and a nylon filter protect the machines from dust.
• A special decompression valve in connection with an "Off-On-Choke" switch makes starting the engine easy.
• The handle position and the vibration damping - separation of oscillating and static mass - were developed in close cooperation with the Fraunhofer-Gesellschaft institute.
• The aluminum protective hood, the high capacity plastic tank with its twin-skinned bottom, the new belt tensioning system with correct tension display and which can be adjusted without tools plus the easy remounting of the disc from a central to an outer position.

BTS 1030 – Features and Benefits

• The units are driven by fully encapsulated, air-cooled two-stroke petrol engines with electronically controlled ignition systems. Designed for excellent combustion performance, low fuel consumption and lower emission values.
• A three-stage foam pre-filter, a paper lamellar filter and a nylon filter protect the machines from dust.
• A special decompression valve in connection with an "Off-On-Choke" switch makes starting the engine easy.
• The handle position and the vibration damping - separation of oscillating and static mass - were developed in close cooperation with the Fraunhofer-Gesellschaft institute.
• The aluminum protective hood, the high capacity plastic tank with its twin-skinned bottom, the new belt tensioning system with correct tension display and which can be adjusted without tools plus the easy remounting of the disc from a central to an outer position.

EHB 7S – Features and Benefits

• Driven by a time-tested, high performance universal motor with protective insulation.
• Power transmission to tool via air-cushioned percussion system without output loss.
• Electronic rpm and percussion rate adjustment for drilling and chiselling applications.
• Service/diagnostic display reports carbon brush wear level and fault-free mains electricity supply.
• Sturdy, double-walled housing with vibration-damped handles.
• Optimum cooling of motor and gears.
• Turning stop and eightfold toolholder lock always place the tool in the right working position.
• Additional and adjustable handle swivels 360°.
• Adjustable depth gauge for drilling applications

BH 23 – Features and Benefits

• Driven by a powerful tried and tested electric universal motor with protective insulation for connecting directly to the mains.
• A specially designed protective hood, which is made of shock-resistant plastics, ensures excellent cooling of the motor as well as ensuring good noise suppression.
• The vibration-damped handles and, in particular, the almost recoilless air-cushioned percussion system, ensure a practically vibration-free operation.
• Thanks to the optimum spring mounting of the three operating handles and the complete engine protective hood this machine is suitable for long periods of operation.

EH 27 – Features and Benefits

• Driven by the powerful, reliable and tested, low emission WACKER 2-stroke petrol engine WM 80. A distinguishing feature is the low fuel consumption.
• Easy-to-start thanks to incorporated centrifugal clutch and an easy-to-operate carburetor.
• A specially designed protective hood, which is made of shock-resistant plastics, ensures excellent cooling of the engine as well as good noise suppression.
• The operator is fully protected against inadvertent contact with live power lines or similar.
• The excellent vibration-damping of the operating handles provide excellent operator comfort and long operating times.
• Central greasing point - fast and simple on-site lubrication with a small hand-held grease gun.
• Integrated, large-capacity fuel tank allows for long, uninterrupted working periods.
• Economical to use.

High performance centrifugal trash pumps designed to keep your jobsite dry.
WACKER's centrifugal trash pumps have proven themselves on jobsites around the world. With its radial flow design and built-in contractor friendly features, this line of trash pump has redefined the quality and durability standards of self-priming centrifugal trash pumps.

Application
Self-priming, high performance pumps designed to handle water with some solid content. Built for the demands of construction, mining, municipality, farm and marine applications.

Reliable vibratory plates offer maximum mobility
Versatile reversible plates ideal for compaction of interlocking paving stones, trenches, landscaping and maintenance. The only plates with a durable, integrated wheel set that provides for maximum built-in mobility. Single lever direction control provides for easy operation.

Application
For compaction of granular materials and mixed materials with some cohesive content, and hot or cold asphalt in confined areas such as parking lots, highway and bridge construction, next to structures, curbs, and abutments.

Application
Designed for compaction in confined areas of granular soil in narrow trenches. These plates are ideal for curbs, gutters, around tanks, forms, columns, footings, guard railings, drainage ditches, gas and sewer works and building construction.

Versatile rollers provide excellent compaction results
WACKER's RD 11 roller series feature dual drum drive and articulated steering for extremely accurate control. The hydrostatic drive with infinitely variable forward and reverse operation and even accelerations and stops guarantees a smooth asphalt finish. Front drum vibration with static rear drum leaves excellent asphalt finish.